Transformer Heating Oven
Transformer Heating Oven
Transformer Heating Oven Manufacturer In Maharashtra
It is designed for drying the solid insulation of power transformers.
A common practice during the production or repair of power transformers is to remove moisture from paper insulation. The dried insulation has dielectric strength 20 times greater than not dried one, as moisture affects its dielectric breakdown.
Depending on the types of transformers there are several ways to remove moisture from the active part. One of them is drying with a vacuum furnace (vacuum oven).
Drying of power transformers with vacuum furnaces has the following advantages:
More intensive evaporation of moisture in comparison with drying with warm air or natural drying;
More intensive evaporation of moisture in comparison with drying with warm air or natural drying;
Even distribution of heating inside the oven. Which leads to even baking.
PHOSPHATING TANKS SYSTEMS
In the pre-treatment or surface protection stage there is a Phosphating/ chromatizing operation which provides the protective coat and later, after a cold water rinse, a passivating operation, wherein the phosphate coat is made less active, further reducing the chances of rust formation.
In the pre-treatment or surface protection stage there is a Phosphating/ chromatizing operation which provides the protective coat and later, after a cold water rinse, a passivating operation, wherein the phosphate coat is made less active, further reducing the chances of rust formation.
Stage – 1: Alkaline Degreasing
Stage – 2: Water Rinsing
Stage – 2: Water Rinsing
Stage – 4: Water Rinsing
Stage – 5: Phosphating
Stage – 6: Water Rinsing
Stage – 7: Passivation
Since Phosphating is at the core of the Powder Coating Tank Process, it has become famous as Phosphating Process Tank in industry circles globally. The Phosphating Process is the most crucial process of the 7 Tank Process for Powder Coating. As part of the process, Zinc Phosphate Solution is applied which helps in making the coating of sheet metal surface smooth and uniform.